Which Statement Regarding the Asynchronous Transfer Mode (Atm) Technology Is Accurate?

Which of the following statements about Asynchronous Transfer Mode (ATM) technology is correct? From best-effort delivery to guaranteed, real-time transmission, ATMs can provide four levels of QoS.

Similarly, Which statement regarding the use of a bridged mode vNIC is accurate?

Which of the following statements about the usage of a bridged mode vNIC is correct? On the actual LAN, the vNIC will have its own IP address.

Also, it is asked, What is the size of an ATM cell including the header?

An ATM cell is defined similarly by ETSI, with a 53-byte cell size, a 5-byte header, and 48-byte contents.

Secondly, Which of the following is an advantage of leasing a frame relay circuit over leasing a dedicated circuit quizlet?

When compared to leasing a dedicated circuit, which of the following is a benefit of leasing a frame relay circuit? You just pay for the amount of bandwidth you use.

Also, What is a data link connection identifier DLCI utilized for?

What is the purpose of a data-link connection identifier (DLCI)? In a frame relay network, routers utilize it to select which circuit to forward a frame to.

People also ask, What statement regarding the password authentication protocol is accurate?

Which of the following statements about the Password Authentication Protocol is correct? PAP has the ability to do authentication, however it is not required. What isn’t one of the jobs that the Device Manager can help you with? It is possible to set up virtual gadgets.

Related Questions and Answers

What is ATM technology?

Asynchronous Transfer Mode (ATM) is a connection-oriented cell-switching technique. End stations in ATM networks connect to the network through dedicated full-duplex connections. Switches are used to build ATM networks, and switches are linked via specific physical connections.

What is ATM layer in networking?

This layer is similar to the data connection layer in the OSI model. It takes the top layer’s 48 byte segments, adds a 5 byte header to each one, and turns them into 53 byte cells. This layer is in charge of cell routing, traffic management, multiplexing, and switching.

What is ATM cell?

The ATM (Asynchronous Transfer Mode) protocol’s primary data unit is the cell. VCI (Virtual Channel Identifier) and VPI (Virtual Path Identifier) are IDs in cells that link them to a logical data stream. A 5 byte header and 48 bytes of payload make up each cell.

Which of the following is an advantage of leasing a frame relay circuit over leasing a dedicated?

Which of the following benefits of leasing a frame relay circuit versus leasing a dedicated circuit is correct? You just pay for what you’ve used in terms of bandwidth.

How ATMS can guarantee a specific QoS for certain types of transmissions?

ATM is based on cells, which are fixed packets of 48 bytes of data plus a 5-byte header. Before transferring data, ATM uses virtual circuits to create a link. Because ATM ensures a consistent connection, network administrators may set QoS levels for certain kinds of traffic.

What is the size of an ATM packet quizlet?

A cell-based switching system (as opposed to a packet-switching technology). ATM cells have a set length, which is usually 53 octets (or 53 8-bit bytes). Two 64 Kbps data lines and one 16 Kbps D channel for time are supported by digital technology.

What statement regarding the use of a network attached storage devices is accurate?

Which of the following statements about the utilization of a network connected storage device is correct? It is simple to enlarge a NAS without disrupting service.

What is the purpose of DLCI in frame relay?

(Data Link Connection Identifier) In a frame relay network, the number of a private or switched virtual circuit. The DLCI field in the frame header defines which logical circuit the data goes across, and each DLCI is assigned a committed information rate (CIR).

What statement regarding denial of service DoS attacks is accurate?

Which of the following statements about denial-of-service (DoS) attacks is correct? A denial-of-service attack stops regular network resources from being used by legitimate users.

Which statement regarding the Border Gateway Protocol BGP is accurate?

Which of the following statements about the Border Gateway Protocol (BGP) is correct? The BGP protocol is restricted to a single autonomous system.

What statement regarding main distribution frame or main distribution facilities is accurate?

Which of the following statements about the main distribution frame or major distribution facilities is correct? d. The MDF is the organization’s LAN or WAN’s centralized point of connectivity.

Which statement does not accurately describe the characteristics of the OSPF protocol?

Which of the following statements does not adequately represent the OSPF protocol? OSPF only uses a little amount of CPU and memory.

What statement regarding the use of system and user environment variables is accurate?

Which of the following statements about the usage of system and user environment variables is correct? Variables in the system environment are always set first.

What statement regarding the use of group policies is accurate?

Which of the following statements about the usage of Group Policies is correct? Non-OU folder containers are not eligible for group policy. When a password update is necessary, what password security feature assures that the user must pick new passwords?

What statement regarding DNS implementation is accurate?

Which of the following statements about DNS implementation is correct? To benefit from load balancing and multimaster relationships, as well as fault tolerance, a domain should have two or more DNS servers.

Why ATM is asynchronous?

In the context of ATM, asynchronous implies that sources are not constrained to providing data within a certain time period, as with circuit switching, which was employed in the old standby T1. ATM sends data in packets rather than bits or frames. In ATM jargon, the packets are referred to as cells.

What is Asynchronous Transfer Mode technology?

Asynchronous transfer mode (ATM) is a wide-area network (WAN) technology that organizes information into cells effectively and flexibly. It is asynchronous in the sense that the recurrence of cells is determined by the needed or instantaneous bit rate.

Which of the following is a characteristic of Asynchronous Transfer Mode ATM?

Asynchronous Transmission Mode (ATM) is a data transfer protocol that has the following features: It’s both scalable and adaptable. It can transport data at rates ranging from megabits to gigabits and is not limited to a single physical media.

Which of the following is based on ATM technology?

ATM technology is used in which of the following? Explanation: Broadband ISDN (B-ISDN) is a new networking technology that uses asynchronous transfer mode (ATM) technology. Packet switching speeds of up to 2.4 Gbps and overall switching capacities of up to 100 Gbps are possible.

How does ATM work in network?

Zero routing is used by ATMs. Dedicated hardware devices known as ATM switches make point-to-point connections between endpoints instead of utilizing software, allowing data to flow directly from source to destination. Variable-length packets are used in Ethernet and Internet Protocol (IP). Data is encoded using fixed-size cells in ATM.

What is ATM describe its structure?

The size of the packets allows ATM to be a flexible service (cells). For all applications, the cell size is 53 bytes. Because of the tiny cell size, ATM networks may support a wide range of applications, including voice, video, and data.

When using Spanning Tree Protocol What is the first step in selecting paths through a network?

What is the first step in picking pathways across a network while using Spanning Tree Protocol? STP must first choose the root bridge, also known as the master bridge. 24.

Conclusion

This Video Should Help:

The “common address redundancy protocol” is the technology that allows ATM to be more reliable. It increases the number of addresses in an ATM network by adding a layer of redundancy at each end of the connection. The “what does the common address redundancy protocol do?” is a question that can be answered with “the common address redundancy protocol”.

Related Tags

• how does a line conditioning ups protect network equipment?
• in metro settings, end-to-end, carrier-grade ethernet networks can be established via what protocol?
• what is distributed switching?
• in a public switched telephone network, what portion of the network is known as the local loop?
• when using spanning tree protocol, what is the first step in selecting paths through a network?